State-of-the-Art
Dry Type Distribution & Control Acme Transformer Sales
Acme Dry Type Distribution and
Control Transformers
Acme Power Distribution
Products Division manufactures a full line of transformers
to meet your power distribution and control applications.
Following is a brief description of the major product groups
contained in Acme(R) Transformer products catalog
(ATD-01).
1) Dry
type distribution transformers
· Single and three phase, .05kVA thru 1000kVA
· Encapsulated and ventilated (air cooled) designs
· Units for harsh environments
· Many primary and secondary voltage combinations
· Copper wound core and coil designs available
· U.L. listed and CSA certified for indoor or outdoor
use
2)
OPTI-Miser(R) low temperature rise transformers
· Single and three phase, 30 thru 500 kVA, 60Hz
· 80 deg. C and 115 deg. C temperature rise - 220 deg.
C insulation system
· Higher efficiency at full rated load
3)
Non-Linear (K-rated) transformers for harmonic loads
· Three phase, 15 thru 600 kVA, K-factors of 4, 13
and 20
· Temperature rise includes 150 deg. C, 115 deg. C and
80 deg. C models
· Special design with double size neutral for high
harmonic content
· I-TRAP(TM) neutral current reducer for 208Y/120V 60Hz
systems
4) Drive
isolation transformers (DIT)
· Three phase, 60Hz, 7.5 thru 660 kVA
· Designed for AC adjustable frequency or DC drives
· Thermal switch kits factory or field installed
5)
Industrial control (machine tool) transformers
· Designed to safely reduce supply voltages
· 50 VA thru 5000 VA sizes, 50 or 60Hz
· Fully encapsulated designs to 500 VA
· Primary and secondary fuse kits available, factory
installed to 1000 VA
6) Buck
Boost transformers
· A simple, economical means to correct offstandard
voltages from 95 to 500 VA
· Single and three phase models; to 10 kVA frame size
7)
PANEL-TRAN(R) zone power centers
· A transformer and power distribution panel all
contained in one convenient unit
· Single and three phase, 480 and 600 V primaries
· Encapsulated and shielded isolation transformer,
primary and secondary main circuit breakers, distribution
panel, all housed in a UL outdoor enclosure
8) Air
conditioning, refrigeration and appliance transformers
· Designed to change a wide range of voltages to
standard motor voltages for appliances, AC units,
refrigeration equipment and other applications demanding
safe and efficient 50 or 60Hz operation.
· Units are equipped with six foot primary cord and
input receptacle.
9) Low
Voltage Lighting Transformers
· The perfect choice for converting 120V to 12V or
24V for low voltage landscape, pool & spa or interior
lighting applications
· Full range of models with many features and options
including electric timer and photocell for complete lighting
control applications.
· 100 watt to 1500 watt models, all UL listed for safe
operation; Covered under Acme's exclusive 10 year product
warranty
For a free copy of catalog
ATD-01 covering the above products, call us at
1-510-490-2187.
To review additional
features on standard single and three phase transformers,
continue scrolling...
Shielded
Power in Many Design Styles Three Phase 3 to 75 KVA
Features
· UL listed, CSA certified and UL-3R enclosure
meets or exceeds all listing criteria including NEMA, ANSI
and OSHA standards.
· UL Class 180 deg. C insulation system. 115 deg. C
rise.
· Extra large front access wiring compartment through 9
KVA; top access through 75 KVA for easier installation and
cooler case temperatures.
· Completely enclosed - suitable for indoor/outdoor
service. Excellent for dust or lint laden atmosphere.
· Encapsulated - electrical grade silica and resin
compound completely encloses the core and coil.
Encapsulation seals out all moisture and air, eliminating
corrosion and insulation deterioration.
· High efficiency and excellent regulation.
· Sound levels below NEMA standards.
· Keyhole mounting slots permit installation of
mounting bolts prior to hanging transformer and are
accessible from the front. Lifting ears for easy
installation.
· Wiring connections can be made outside of wiring
compartment due to the use of flexible leads.
· 3-9 KVA provided with dual size knockouts in sides
and bottom of wiring compartment.
· Termination - copper lead wire.
· Electrostatic shielding provided on all 60 Hz
isolation transformers.
Single
Phase 37.5 to 250 KVA; Three Phase 25 to
1000 KVA
Features
· With weather shield, UL Type 3R enclosure type 2
enclosure with-out weather shield. UL listed and CSA
certified.
· UL Class 220 deg. C insulation system. 150 deg. C
rise.
· Extra large wiring compartment for easier
installation and cooler case temperatures.
· NEMA standard bus bar terminals no special tools
needed to make clearly marked connections. Tap changing
easily accomplished with jumpers.
·
Noise and vibration
isolating pads standard to assure quiet operation.
·
Large permanently
legible nameplates on front.
·
Single phase units
can be banked for 3 phase service.
·
All units have
ground studs for use with nonmetallic conduit.
·
Suitable for wall or
"trapeze" mounting. Wall brackets are available for units up
to 50 KVA single and 75 KVA three phase.
·
Other models are
available with class 220 deg. C insulation and either 115
deg. C or 80 deg. C rise operating temperature.
·
Termination - single
phase 37.5 to 100 KVA, copper bus; 167 to 250 KVA, aluminum
bus. Three phase 27 to 225 KVA, copper bus; 275 to 1000 KVA,
aluminum bus.
·
Electrostatic
shielding provided on all 60 Hz isolation transformers.
Single
Phase, .05-.150 KVA
Features
·
UL listed, CSA
certified and UL-3R enclosure meets or exceeds all listing
criteria including NEMA, ANSI and OSHA standards.
·
Easy and convenient
installation to meet your requirements, the transformer can
be mounted in any position.
·
Long life UL class
130 deg. C insulation system. Transformers can be banked for
three phase service.
·
Large wiring
compartment no conduit or pull boxes required. Front access
for wiring ease. Wiring compartment remains cool.
·
Completely enclosed
UL-3R enclosure for indoor/outdoor service. Rugged
non-ventilated construction.
·
Plenty of knockouts
for multi-directional entry.
·
All copper lead wire
terminations.
·
Ground studs for use
with non-metallic conduit.
Single-Phase,
.250-25 KVA
Features
·
UL listed, CSA
certified and UL-3R enclosures meets or exceeds all listing
criteria including NEMA, ANSI and OSHA standards.
·
Shielded for cleaner
power.
·
Encapsulated and
completely enclosed design electrical grade silica and resin
compounds completely enclose the core and coil to seal out
all moisture and air. UL Type 3R enclosure for indoor or
outdoor service. Encapsulation eliminates corrosion and
insulation deterioration.
·
Quiet operation with
sound levels well below NEMA standards.
·
Long life UL class
155 deg. C insulation system. 115 deg. C rise thru .750 KVA;
180 deg. C insulation system, 115 deg. C rise, 1 KVA and
above.
·
Installation keyhole
mounting slots for mounting bolts prior to installation.
Mounting slots are accessible from the front Lifting ears
are included on 3 to 25 KVA units.
·
Wiring flexible
copper leadwire terminations for easy connections outside
the front access wiring compartment. Dual size knockouts in
both sides and the bottom of the wiring compartment for
greater wiring convenience and flexibility.
Call For Our Acme Dry Type Distribution and
Control Transformer Catalog
To receive a copy of Acme's
full line catalogs, call us 1-510-490-2187.
Call Our Acme Dry Type Distribution and
Control Transformer Specialists Today!
Contact us and our support
team at TEMCo at 510-490-2187 to get your quote, place your
order and arrange for shipping.
|
or
